Laser scanning path generation considering photopolymer solidification in micro-stereolithography

It is essential to automate the scanning path generation process to effectively implement the micro-stereolithography. However, a scanning path that is generated based only on a 3D CAD model introduces dimensional inaccuracies. In micro-stereolithography, the photopolymer solidification is affected by fabrication conditions, such as the optical properties (laser power, laser scanning speed, laser scanning pitch focusing condition, etc.) and material properties of the photopolymer. Thus, the photopolymer solidification phenomena must be considered when generating a laser scanning path. In this paper, a scanning path generation algorithm that uses 3D CAD data and considers the photopolymer solidification phenomena is proposed to improve the dimensional accuracy in micro-stereolithography. Multi-line photopolymer solidification experiments were performed for various laser scanning conditions to examine the photopolymer solidification phenomena. From these experiments, linear relations between the solidification length (width) and scanning length (width) were acquired and stored in a database. Subsequently, these data were utilized to compensate the scanning path of the laser beam. In addition, experiments for determining the layer thickness in the z-direction were performed and these results were also used in the scanning path generation algorithm.This research was supported by the Highly Advanced National Project (http://www.most.go.kr), which performs some of the National R&D Program, and sponsored by the Korean Ministry of Science and Technology under the contract project code M10214000116-02B1500-02010.     

Application of condition-based HRA method for a manual actuation of the safety features in a nuclear power Plant

A practical approach to develop a more realistic fault-tree model with a consideration of various conditions endured by a human operator is proposed. In safety-critical systems, the generation failure of an actuation signal is caused by the concurrent failures of the automated systems and an operator action. These two sources of safety signals are complicatedly correlated. The failures of sensors or automated systems will cause a lack of necessary information for a human operator and result in error-forcing contexts such as the loss of corresponding alarms and indications. It is well known that the error-forcing contexts largely affect the operator's performance. An automated system which consists of multiple processing channels and complex components is also affected by the availability of the sensors. This paper proposes a condition-based human reliability assessment (CBHRA) method in order to address these complicated conditions in a practical way. We apply the CBHRA method to the manual actuation of the safety features such as a reactor trip and auxiliary feedwater actuation in Korean Standard Nuclear Power Plants. Even the human error probability of each given condition is simply assumed, the application results prove that the CBHRA effectively accommodates the complicated error-forcing contexts into the fault trees.     

海洋石油开发工业污染物产生系数和排放系数研究

污染物产生系数和排放系数是工程环境影响评价的重要指标,但对于海洋石油开发工程环境影响评价来说,迄今尚无具权威性的系数可资使用。在我国近海石油开发工程污染源系统调查的基础上,对海洋石油开发行业污染物产生系数和排放系数的定义、计算方法、应用范围及应用方式进行了探讨,研究结果可为海洋石油开发工程项目环境影响评价及环境保护管理,以及行业或企业有关标准的制定提供参考。     

可见光共振腔发光二极管的研究进展

共振腔发光二极管是一种具有优良发光性能的光电器件。概述了对可见光共振腔发光二极管的共振腔结构、反射镜材料体系、基本工作机理和发光特性，并展望了这种器件的发展前景。     

三峡-葛洲坝梯级电站水能优化利用效益分析

三峡——葛洲坝梯级电站是我国的巨型水电站，控制水量接近长江总水量的一半，电站的水能优化利用对充分利用长江流域水资源、提高电站发电效益至关重要。根据长江上游流域来水特性及梯级枢纽的运行特点．对梯级电站在三峡工程围堰发电期的水能优化利用途径、取得的发电效益及初期运行期梯级电站水能优化利用的潜力进行了系统分析。有利于提高电站的发电效益。     

分布式光纤测温系统在小湾拱坝温度监测中的运用

小湾水电工程拱坝内铺设了10 km的分布式测温光纤,为目前国内之最.本文总结了测温光纤在常态混凝土下施工埋设,特别是在当前国内没有相关技术规范的情况下,对测温光纤的率定和施工中存在的问题进行了总结.小湾大坝绘制出温度场分布图,为大坝温控工作提供了较为精准的数据依据,为今后测温光纤的推广和使用提供宝贵的经验.     

采用基本门单元完全测试矢量的测试生成算法

文章介绍了一种采用基本逻辑门单元的安全测试矢量集生成测试矢量的方法，该方法可以将搜索空间限制在2(n 1）种组合内。它采用故障支配和故障等效的故障传播、回退等技术，建立了一套从局部到全局的测试生成新方法。同时，利用基本门单元安全测试矢量的规律性，可以实现最小的内存容量要求。在一些基准电路的应用实例中，得到了满意的结果。     

改进的第三代相干算法及应用

在讨论相干技术发展及三代相干算法优缺点的基础上，介绍了改进的第三代相干算法。应用自行开发的相干软件对多个油气勘探和开发区块的三维地震资料进行处理、分析，对相干时窗长度、相关道数等参数对算法效果的影响及相干体对断层、异常地质体的识别，以及解释方法进行了探讨。应用实例证明，改进的第三代相干算法抗干扰能力强，横向分辨率高，不仅适用于倾斜地层，而且对断层尤其对小断层、异常地质体具有较高的检测能力，是油气勘探和开发的一项有效和实用的技术。     

基于GPRS的闸门监控系统设计

利用通用分组无线电业务(GPRS)通信技术、可编程逻辑控制器(PLC)和RS-485总线设计了稳定、经济的分布式闸门监控系统。该系统采用Internet/数字数据网(DDN)和GPRS Modem方式接入无线通信网络,并根据闸门监控系统的运行特点,采用GPRS实时通信与短信服务(SMS)通信相结合的方式,不仅保证了系统通信的稳定性和平衡性,且优化了系统的运行成本。最后,对基于GPRS的闸门监控系统的经济性和适用性进行了讨论。     

Generation and context memory.

Generation enhances memory for occurrence but may not enhance other aspects of memory. The present study further delineates the negative generation effect in context memory reported in N. W. Mulligan (2004). First, the negative generation effect occurred for perceptual attributes of the target item (its color and font) but not for extratarget aspects of context (location and background color). Second, nonvisual generation tasks with either semantic or nonsemantic generation rules (antonym and rhyme generation, respectively) produced the same pattern of results. In contrast, a visual (or data-driven) generation task (letter transposition) did not disrupt context memory for color. Third, generating nonwords produced no effect on item memory but persisted in producing a negative effect on context memory for target attributes, implying that (a) the negative generation effect in context memory is not mediated by semantic encoding, and (b) the negative effect on context memory can be dissociated from the positive effect on item memory. The results are interpreted in terms of the processing account of generation. The original, perceptual-conceptual version of this account is too narrow, but a modified processing account, based on a more generic visual versus nonvisual processing distinction, accommodates the results. (PsycINFO Database Record (c) 2010 APA, all rights reserved)